Raritan PX3-4000 series, Руководство пользователя

Страница: 174 / 688

Chapter 6: Using the Web Interface
153
Checking the Internal Beeper State
The internal beeper can alert you if any overcurrent protector, including
fuses and circuit breakers, has tripped or blown on the PX. See
Beeper
(on page 91). You can remotely check its state.
To check the PX beeper's state:
1. Click the PDU folder.
Note: The folder is named "my PX" by default. The name can be
customized.
2. Locate the "Internal Beeper" section in the right pane. Either of the
following states is displayed.

Off: The beeper is turned off.

Active: The beeper is turned on. A field titled "Activation reason"
appears below the beeper state, indicating why the beeper
sounds an alarm.
Tip: To check the internal beeper state via CLI, see PDU Configuration
(on page 350).
Setting the EnergyWise Configuration
If a Cisco
®
EnergyWise energy management architecture is implemented
in your place, you can enable the Cisco EnergyWise endpoint
implemented on the PX device so that this device becomes part of the
Cisco EnergyWise domain.
The Cisco EnergyWise feature implemented on the PX is disabled by
default.
To set the Cisco EnergyWise configuration:
1. Choose Device Settings > EnergyWise. The EnergyWise
Configuration dialog appears.
2. In the Enable EnergyWise field, select the "enable" checkbox to
enable the Cisco EnergyWise feature.
3. In the "Domain name" field, type the name of a Cisco EnergyWise
domain where the PX belongs. The domain name comprises up to
127 printable ASCII characters.

Spaces and asterisks are NOT acceptable.
4. In the "Domain password" field, type the authentication password
(secret) for entering the Cisco EnergyWise domain. The password
comprises up to 127 printable ASCII characters.

Spaces and asterisks are NOT acceptable.