Raritan PX3-4000 series, Руководство пользователя

Страница: 591 / 688

Appendix F: PX3 Phase I LCD Display
570
For a master device, a word "MASTER" is displayed on the LCD display
instead of the word "SLAVE."
To retrieve the device's USB-cascading position information:
1. Press the MODE button until device settings are displayed, indicated
by a 'd' in at the top left of the display.
2. Press the FUNC button until "CA" is displayed at the top right of the
display.
3. The device's position is represented by any number defined below:
Number Device position
0 Master device
1 Slave 1
2 Slave 2
3 Slave 3
4 Slave 4
5 Slave 5
6 Slave 6
7 Slave 7
Note 1: For a standalone PX, its position is the number 0, but the word
"MASTER" is NOT shown on the LCD display.
Note 2: If reversing or disconnecting the USB cable from a slave device,
causing the slave device to become a master or standalone device, you
must plug an Ethernet cable to it to update its USB-cascading status.