Raritan PX3-4000 series, Руководство пользователя

Страница: 32 / 688

11
This chapter explains how to install a PX device and configure it for
network connectivity.
In This Chapter
Before You Begin ....................................................................................11
Installing Cable Retention Clips on the Inlet (Optional)...........................12
Connecting a Locking Line Cord .............................................................14
Connecting the PDU to a Power Source.................................................16
Configuring the PX ..................................................................................16
Cascading the PX via USB......................................................................28
Installing Cable Retention Clips on Outlets (Optional) ............................31
Before You Begin
Before beginning the installation, perform the following activities:
 Unpack the product and components
 Prepare the installation site
 Check the branch circuit rating
 Fill out the equipment setup worksheet
Unpacking the Product and Components
1. Remove the PX device and other equipment from the box in which
they were shipped. See
Package Contents
(on page 1) for a
complete list of the contents of the box.
2. Compare the serial number of the equipment with the number on the
packing slip located on the outside of the box and make sure they
match.
3. Inspect the equipment carefully. If any of the equipment is damaged
or missing, contact Raritan's Technical Support Department for
assistance.
4. Verify that all circuit breakers on the PX device are set to ON. If not,
turn them ON.
Or make sure that all fuses are inserted and seated properly. If there
are any fuse covers, ensure that they are closed.
Note: Not all PX devices have overcurrent protection mechanisms.
Preparing the Installation Site
1. Make sure the installation area is clean and free of extreme
temperatures and humidity.
Chapter 3 Installation and Configuration