Raritan PX3-4000 series Скачать руководство пользователя страница 347

Страница: 347 / 688

Chapter 6: Using the Web Interface

326

A Note about Firmware Upgrade Time

The PDU firmware upgrade time varies from unit to unit, depending on

various external and internal factors.
External factors include, but are not limited to: network throughput,

firmware file size, and speed at which the firmware is retrieved from the

storage location. Internal factors include: the necessity of upgrading the

firmware on the microcontroller and the number of microcontrollers that

require upgrade (which depends on the number of outlets). The

microcontroller is upgraded only when required. Therefore, the length of

firmware upgrade time ranges from approximately 3 minutes (without any

microcontroller updated) to almost 7 minutes (with all microcontrollers for

48 outlets updated). Take the above factors into account when

estimating the PDU's firmware upgrade time.
The time indicated in this note is for PX web-interface-based upgrades.

Upgrades through other management systems, such as Raritan's Power

IQ, may take additional time beyond the control of the PDU itself. This

note does not address the upgrades using other management systems.

Viewing Firmware Update History

The firmware upgrade history, if available, is permanently stored on the

PX device.
This history indicates when a firmware upgrade event occurred, the prior

and new versions associated with the firmware upgrade event, and the

upgrade result.

To view the firmware update history:

1. Choose Maintenance > View Firmware Update History. The

Firmware Update History dialog appears, with the following

information displayed.



Date and time of the firmware upgrade event



Previous firmware version



Update firmware version



Firmware upgrade result

2. You may change the number of displayed columns or re-sort the list

for better viewing the data.

3. To view the details of any firmware upgrade event, select it and click

Details, or simply double-click the event. The Firmware Update

Details dialog appears, showing detailed information of the selected

event.

4. Click Close to quit the dialog.

Содержание PX3-4000 series
















































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PX3-4000 series

Отзывы:

Похожие инструкции для PX3-4000 series

Бренды по названию

Популярные бренды

Raritan PX3-4000 series, Руководство пользователя

Результаты поиска

Содержание PX3-4000 series

Отзывы:

Похожие инструкции для PX3-4000 series

Бренды по названию

Популярные бренды