Raritan PX3-4000 series, Руководство пользователя

Страница: 295 / 688

Chapter 6: Using the Web Interface
274
Field Description
Wait time (in
seconds) before
resuming pinging
after failure
The wait time before the PX resumes
pinging after the monitored equipment is
declared "Unreachable." Valid range is 1 to
1200 (seconds).
Number of
consecutive failures
before disabling
feature (0 =
unlimited)
The number of times the monitored
equipment is declared "Unreachable"
consecutively before the PX disables the
ping monitoring feature for it and shows
"Waiting for reliable connection." Valid
range is 0 to 100.
5. Click OK.
6. To add more IT devices, repeat Steps 2 to 5.
7. Click Close to quit the dialog.
In the beginning, the status of the monitored equipment shows "Waiting
for reliable connection," which means the requested number of
consecutive successful or unsuccessful pings has not reached before the
PX can declare that the monitored device is reachable or unreachable.
Example: Ping Monitoring and SNMP Notifications
In this illustration, it is assumed that a significant PDU (IP address:
192.168.84.95) shall be monitored by your PX to make sure that PDU is
properly operating all the time, and the PX must send out SNMP
notifications (trap or inform) if that PDU is declared unreachable due to
power or network failure. The prerequisite for this example is that the
power source for your PX is different from the power source for that
PDU.
This requires two steps: set up the PDU monitoring and create an event
rule.
Step 1: Set up the ping monitoring for the target PDU
1. Choose Device Settings > Server Reachability. The Server
Reachability dialog appears.
2. Click New.
3. Type 192.168.84.95 in the "IP address/hostname" field.
4. Ensure the "Enable ping monitoring for this server" checkbox is
selected.
5. To make the PX declare the accessibility of the monitored PDU
every 15 seconds (3 pings * 5 seconds) when that PDU is accessible,
do the following: