Raritan PX3-4000 series, Руководство пользователя

Страница: 607 / 688

Appendix G: PX Models with Residual Current Monitoring
586
Option Description
A numeric
value
Sets a value for the specified RCM current
threshold of the specified inlet and enables this
threshold simultaneously.
Note that this value is measured in A, not mA.
Therefore, to set the value to 6mA, type
0.006
.
 <hy_value> is a numeric value measured in amperes (A), not
milliamperes (mA). For example, to set the value to 15mA, type
0.015
.
Setting Front Panel RCM Self-Test
You can enable or disable the front panel RCM self-test function via CLI
in addition to the web interface.
To enable the front panel RCM self-test:
# security frontPanelPermissions add rcmSelfTest
To disable the front panel RCM self-test:
# security frontPanelPermissions remove rcmSelfTest
Running RCM Self-Test
You can perform RCM self-test for a specific inlet via CLI. After the
self-test finishes, the test result is shown: pass or fail.
To perform RCM self-test:
# rcm selfTest inlet <n>
Variables:
 <n> is the inlet's number. For a single-inlet PDU, <n> is always 1.