Mitsubishi Electric 800 Series, Инструкция по эксплуатации, Страница: 259 / 727

(E) Environment setting parameters
258
PARAMETERS
 GOT initial setting (RS-485 terminals) (Pr.999 = "11, 13")

When Pr.414 ="1", the setting value is not changed.
• Initial setting with the GOT2000 series
- When "FREQROL 500/700/800, SENSORLESS SERVO" is selected for "Controller Type" in the GOT setting, set
Pr.999 ="11" to configure the GOT initial setting.
- When "FREQROL 800(Automatic Negotiation)" is selected for "Controller Type" in the GOT setting, the GOT automatic
connection can be used. When "FREQROL 800 (Automatic Negotiation)" is selected for "Controller Type" in the GOT setting
and the GOT automatic connection is not used, set
Pr.999 ="13" to configure the GOT initial setting. (Refer to page 585 )
• Initial setting with the GOT1000 series
- Set Pr.999 ="11" to configure the GOT initial setting.
NOTE
• Always perform an inverter reset after the initial setting.
• For the details of connection with GOT, refer to the Instruction Manual of GOT.
 Rated frequency (Pr.999 = "20 (50 Hz), 21 (60 Hz)")
Pr. Name
Initial
value
Pr.999="11" Pr.999="13"
Refer to
page
79 Operation mode selection
0 0 0 291
332 RS-485 communication speed
96 192 1152
553
333 RS-485 communication stop bit length
1 10 0
334 RS-485 communication parity check selection
2 1 1
335 RS-485 communication retry count
1 9999 9999
336 RS-485 communication check time interval
0 s 9999 9999
337 RS-485 communication waiting time setting
9999 0 ms 0 ms
340 Communication startup mode selection
0 1 1 300
341 RS-485 communication CR/LF selection
1 1 1 553
414 PLC function operation selection
0 — 2

531
549 Protocol selection
0 0 0 569
Pr. Name
Initial
value
Pr.999 = "21" Pr.999 = "20"
Refer to
page
3 Base frequency
60 Hz 60 Hz 50 Hz 591
4 Multi-speed setting (high speed)
60 Hz 60 Hz 50 Hz 314
20 Acceleration/deceleration reference frequency
60 Hz 60 Hz 50 Hz 269
37 Speed display
0 0 345
55 Frequency monitoring reference
60 Hz 60 Hz 50 Hz 357
66
Stall prevention operation reduction starting
frequency
60 Hz 60 Hz 50 Hz 332
116 Third output frequency detection
60 Hz 60 Hz 50 Hz 332
125 (903) Terminal 2 frequency setting gain frequency
60 Hz 60 Hz 50 Hz
402
126 (905) Terminal 4 frequency setting gain frequency
60 Hz 60 Hz 50 Hz
263 Subtraction starting frequency
60 Hz 60 Hz 50 Hz
526
266
Power failure deceleration time switchover
frequency
60 Hz 60 Hz 50 Hz
386 Frequency for maximum input pulse
60 Hz 60 Hz 50 Hz 308
505 Speed setting reference
60 Hz 60 Hz 50 Hz 345
808 Forward rotation speed limit/speed limit
60 Hz 60 Hz 50 Hz 195
918 Terminal 1 gain frequency (speed)
60 Hz 60 Hz 50 Hz 402