Mitsubishi Electric 800 Series, Инструкция по эксплуатации, Страница: 466 / 727

(A) Application parameters
PARAMETERS
465
5
GROUP
A
 Setting the frequency during stop-on-contact control (Pr.270 = "1, 3, 11
or 13")
• The following table lists the frequencies set when the input terminals (RH, RM, RL, RT, JOG) are selected together. Bold
frame indicates stop-on-contact control is valid.
• Stop-on-contact control is disabled when remote setting function is selected ( Pr.59 = "1 to 3").
NOTE
• Changing the terminal assignment using Pr.178 to Pr.189 (Input terminal function selection) may affect the other
functions. Set parameters after confirming the function of each terminal.
??????? Parameters referred to
Pr.4 to Pr.6, Pr.24 to Pr.27 (Multi-speed setting) page 314
Pr.15 Jog frequency page 312
Pr.22 Stall prevention operation level, Pr.48 Second stall prevention operation level page 332
Pr.22 Torque limit level page 154
Pr.59 Remote function selection page 279
Pr.72 PWM frequency selection page 261
Pr.79 Operation mode selection page 291
Pr.95 Online auto tuning selection page 444
Pr.128 PID action selection page 488
Pr.178 to Pr.189 (Input terminal function selection) page 415
Pr.270 Stop-on contact/load torque high-speed frequency control selection page 466
Pr.292 Automatic acceleration/deceleration page 285 , page 288
Input signal
Set frequency
RH RM RL RT JOG
ON
Pr.4 Multi-speed setting
(high speed)
ON
Pr.5 Multi-speed setting
(middle speed)
ON
Pr.6 Multi-speed setting (low
speed)
ON
By 0 to 5 V (0 to 10 V), 4 to 20
mA input
ON Pr.15 Jog frequency
ON ON
Pr.26 Multi-speed setting
(speed 6)
ON ON
Pr.25 Multi-speed setting
(speed 5)
ON ON
Pr.4 Multi-speed setting
(high speed)
ON ON Pr.15 Jog frequency
ON ON
Pr.24 Multi-speed setting
(speed 4)
ON ON
Pr.5 Multi-speed setting
(middle speed)
ON ON Pr.15 Jog frequency
ON ON
Pr.6 Multi-speed setting (low
speed)
ON ON Pr.15 Jog frequency
ON ON Pr.15 Jog frequency
ON ON ON Pr.15 Jog frequency
ON ON ON Pr.15 Jog frequency
ON ON ON Pr.15 Jog frequency
ON ON ON
Pr.6 Multi-speed setting (low
speed)
ON ON ON Pr.15 Jog frequency
ON ON ON Pr.15 Jog frequency
ON ON ON
Pr.6 Multi-speed setting (low
speed)
ON ON ON Pr.15 Jog frequency
ON ON ON
Pr.26 Multi-speed setting
(speed 6)
ON ON ON
Pr.27 Multi-speed setting
(speed 7)
ON ON ON ON Pr.15 Jog frequency
ON ON ON ON Pr.15 Jog frequency
ON ON ON ON Pr.15 Jog frequency
ON ON ON ON Pr.15 Jog frequency
ON ON ON ON
Pr.6 Multi-speed setting (low
speed)
ON ON ON ON ON Pr.15 Jog frequency
By 0 to 5 V (0 to 10 V), 4 to 20
mA input
Input signal
Set frequency
RH RM RL RT JOG