Mitsubishi Electric 800 Series, Инструкция по эксплуатации, Страница: 494 / 727

(A) Application parameters
PARAMETERS
493
5
GROUP
A

When Pr.133

"9999", the Pr.133 setting is valid.

CC-Link, CC-Link IE Field Network, or LONWORKS communication is available. For details on communication, refer to the Instruction Manual of
each option.

For the details of the PLC function, refer to the PLC Function Programming Manual.
• The set point/deviation input method can also be flexibly selected by Pr.609 PID set point/deviation input selection and
the measured value input method can be selected by Pr.610 PID measured value input selection . Selection by Pr.609
and Pr.610 is valid when Pr.128 = "1000 to 2011".

When the same input method has been selected for the set point and measured value using Pr.609 and Pr.610 , set point input is invalid. (The
inverter runs at set point 0%)

CC-Link, CC-Link IE Field Network, or LONWORKS communication is available. For details on communication, refer to the Instruction Manual of
each option.
NOTE
• When terminals 2 and 4 are selected for deviation input, perform bias calibration using C3 and C6 to prevent a minus voltage
from being entered as the deviation input signal. Input of a minus voltage might damage devices and the inverter.
• For the set point setting by parameters, the set point setting screen can be displayed quickly by setting the Extended direct
setting. (Refer to page 248 .)
• The following shows the relationship between the input values of the analog input terminals and set point, measured value
and deviation. (Calibration parameter initial values)

Can be changed by Pr.73 and Pr.267 and the voltage/current input switch. (Refer to page 393 .)
NOTE
• Always perform calibration after changing the voltage/input specification with Pr.73 , Pr.267 , and the voltage/current input
selection switch.
1000
Valid
Reverse action
According to Pr.609

According to Pr.610 -
1001 Forward action
1010 Reverse action
- - According to Pr.609
1011 Forward action
2000
Reverse action (without
frequency reflected)
According to Pr.609

According to Pr.610 -
2001
Forward action (without
frequency reflected)
2010
Reverse action (without
frequency reflected)
- -- According to Pr.609
2011
Forward action (without
frequency reflected)
Pr.609 and Pr.610 settings Input method
1 Terminal 1

2 Terminal 2

3 Terminal 4

4 Communication

5 PLC function
Input
terminal
Inspect
specification

Relationship with analog input
Calibration parameter
Set point Result Deviation
Terminal 2
0 to 5 V
0 V=0%
5 V=100% 0 V=0%
5 V=100% 0 V=0%
5 V=100%
Pr.125, C2 to C4 0 to 10 V
0 V=0%
10 V=100% 0 V=0%
10 V=100% 0 V=0%
10 V=100%
0 to 20 mA
0 mA=0%
20 mA=100% 0 mA=0%
20 mA=100% 0 V=0%
20 mA=100%
Terminal 1
0 to

5 V
-5 V to 0 V=0%
5 V=+100% -5 V to 0 V=0%
5 V=+100%
-5 V=-100%
0 V=0%
5 V=+100%
When Pr.128 = "10",
Pr.125, C2 to C4.
When Pr.128

"1000",
C12 to C15. 0 to

10 V
-10 V to 0 V=0%
10 V=+100% -10 V to 0 V=0%
10 V=+100%
-10 V=-100%
0 V=0%
10 V=+100%
Terminal 4
0 to 5 V
0 V to 1 V=0%
5 V=100% 0 Vto 1 V=0%
5 V=100%
0 V=-20%
1 V=0%
5 V=100%
Pr.126, C5 to C7 0 to 10 V
0 V to 2 V=0%
10 V=100% 0 V to 2 V=0%
10 V=100%
0 V=-20%
1 V=0%
10 V=100%
0 to 20 mA
0 to 4 mA=0%
20 mA=100% 0 to 4 mA=0%
20 mA=100%
0 V=-20%
4 mA=0%
20 mA=100%
Pr.128
setting
Pr.609
Pr.610
PID action Set point input Measured value input Deviation input