3.5 Terminal Cover
3.5
Terminal Cover
Follow the procedure below to remove the terminal cover for wiring and to reattach the terminal cover after wiring is
complete.
♦ Removing/Reattaching the Terminal Cover
■ Removing the Terminal Cover
Models CIMR- LD 2A 0018 to 2A0075 and 4A0009 to 4A0039
1. Loosen the terminal cover screw using a #2 Phillips screwdriver. Screw sizes vary by drive model.
F ig u r e 3 .4 R e m o v in g t h e T e rm in a l C o v e r
2. Push in on the tab located on the bottom of the terminal cover and gently pull forward to remove the terminal
cover.
F ig u r e 3 .5 R e m o v in g t h e T e rm in a l C o v e r
Models CIMR-LC2A0085 to 2A0180 and 4A0045 to 4A0150
1. Loosen the screws on the terminal cover, then pull down on the cover.
CAUTION!
D o n o t completely^ re m o v e the c o v e r screw s, ju s t lo o s e n them . I f the c o v e r s c re w s are re m o v e d com pletely, the te rm in a l
c o v e r m a y fa ll o ff c a u s in g an injury.
Note: The shape o f the terminal covers and the numbers o f screws differ depending on the drive models. R efer to
Component Names
on page 29
for details.
F ig u r e 3 .6 R e m o v in g t h e T e rm in a l C o v e r
YASKAWA ELECTRIC SIEP C710616 33D YASKAWA AC Drive L1000A Technical Manual
51
E
le
c
tr
ic
a
l
In
s
ta
ll
a
ti
o
n