8.4 Option Card Installation
2.
3.
Note:
Shut off power to the drive, wait the appropriate amount of time for voltage to dissipate, then remove the digital
operator (E) and front covers (D, F). Refer to
Digital Operator and Front Cover on page 53.
F ig u r e 8 .3 R e m o v e t h e F r o n t C o v e r s a n d D igital O p e r a to r
Insert the option card (B) into the CN5-A (J), CN5-B (K) or CN5-C (L) connectors located on the drive and fasten
it into place using one of the included screws (C).
F ig u r e 8 .4 I n s e r t t h e O p tio n C a rd
Connect one end of the ground wire (H) to the ground terminal (I) using one of the remaining screws (C).
Connect the other end of the ground wire (H) to the remaining ground terminal and installation hole on the option
(B) using the last remaining provided screw (C).
F ig u r e 8 .5 C o n n e c t t h e G r o u n d W ire
The option package includes two ground wires. U se the longer w ire when plugging the option into connector CN5-C on the drive
side. Use the shorter w ire w hen plugging the option into connector CN5-B. Refer to the option card instruction manual for more
inform ation.
There are tw o screw holes on the drive for use as ground term inals (I). W hen connecting three options, two ground w ires will need to
share the same drive ground terminal.
T
E
L
1
YASKAWA ELECTRIC SIEP C710616 33D YASKAWA AC Drive L1000A Technical Manual
297
P
e
ri
p
h
e
ra
l
D
e
v
ic
e
s
&
O
p
ti
o
n
s