YASKAWA L1000A Series, Technical Manual, Page: 356 / 430

B.3 Parameter Table
No. (Addr.) Name Description
Analog Output
Level
Unit Page
U 4-24
(7E6H)
Number o f Travels
(Lower 4 digit)
Displays the lower four digits for the number o f trips the drive has made.
N o signal output
available
U 4-25
(7E7H)
Number o f Travels
(Higher 4 digit)
Displays the upper four digits for the number o f trips the drive has made.
N o signal output
available
U 4-26
(7E8H )
Max. Current during
Acceleration
Shows the maximum current that occurred during acceleration.
N o signal output
available
0.1 A
U 4-27
(7E9H)
Max. Current during
Deceleration
Shows the maximum current that occurred during deceleration.
N o signal output
available
0.1 A
U 4-28
(7EAH)
Max. Current during Constant
Speed
Shows the maximum current that occurred during ride at top speed.
N o signal output
available
U 4-29
(7EDH)
Max. Current during Leveling
Speed
Shows the maximum current that occurred during ride at leveling speed.
N o signal output
available
U 4-30
(7EEH)
Slip Compensation Value
CLV ■ CLV/PM
Shows the slip compensation value.
N o signal output
available
U4-31
(7EFH)
Car Acceleration Rate
CLV В CLV/PM
Shows the car acceleration rate.
N o signal output
available
0.01 m /s2
U 4-40
(7FDH)
Speed Reference Limit at
R escue Operation Displays the speed limit for R escue Operation based on how much power the backup battery or
UPS has. Displays 0% when R escue Operation is not being performed.
N o signal output
available
1%
U 4-42
(855H)
<35>
Remaining Distance
CLV ■ CLV/PM
Displays the remaining distance according to the stopping method selected.
10 V:
S5-10 = 1: S5-11
S5-10 = 2: S5-12
1 mm
U 4-43
(856H)
<35>
Minimum Deceleration
Distance
V/f
■
OLV
■
CLV
■
CLV/PM
D isplays the Minimum Deceleration Distance calculated by E1-04.
N o signal output
available
U 4-44
(857H)
<35>
Minimum Stop Distance
CLV ■ CLV/PM
Displays the Minimum Stop Distance calculated by d1-26.
N o signal output
available
<31> Setting units are determined by the digital operator display unit selection (o1-03). W hen o1-03 = 0, the value is set in Hertz. W hen o1-03 = 4
or 5, the value is displayed in m/s. W hen o1-03 = 6, the value is displayed in ft/min.
<35> o1-12 (Length U nits) determines the units. W hen o1-12 is set to 0, the unit is millimeters. W hen o1-12 is set to 1, the unit is inch.
N ote: Fault trace (i.e., the fault history) is not m aintained when CPF00, CPF01, CPF06, CPF24, oFA00, oFb00, oFC00, Uv1, U v2, or Uv3
occur.
■ U6: Control Monitors
No. (Addr.) Name
U6-01
(51H)
Motor Secondary Current (Iq)
U 6-02
(52H)
Motor Excitation Current (Id)
U 6-03
(54H)
Speed Control Loop Input
U 6-04
(55H)
Speed Control Loop Output
U 6-05
(59H)
Output Voltage Reference (Vq)
U 6-06
(5AH)
Output Voltage Reference (Vd)
U 6-07
(5FH)
q-Axis Current Controller
Output
U 6-08
(60H)
d-Axis Current Controller
Output
U 6-13
(7CAH)
Flux Position Detection
(sensor)
U 6-18
(7CDH)
Speed Detection PG1 Counter
Description
Displays the value o f the motor secondary current (Iq). Motor rated secondary current is 100%.
Analog Output
Level
10 V: Motor
secondary rated
current
Unit Page
CLV В CLV/PM
Displays the value calculated for the motor excitation current (Id). Motor rated secondary
current is 100%.
10 V: Motor
secondary rated
current
0.1%
10 V: M ax frequency
Displays the input and output values o f the speed control loop.
10 V: Motor
secondary rated
current
10 V: 200 Vrms <9> 0.1 Vac
Output voltage reference (V q) for the q-axis.
10 V: 200 Vrms <9> 0.1 Vac
Output voltage reference (V d) for the d-axis.
10 V: 200 Vrms <9>
Displays the output value for current control relative to motor secondary current (q-axis).
10 V: 200 Vrms <9> 0.1%
Displays the output value for current control relative to motor secondary current (d-axis).
Monitors the value o f the flux position detection (sensor).
10 V: 180 deg
- 1 0 V: - 1 8 0 de
0.1 deg
Monitors the number o f pulses for speed detection (PG1).
1 pulse
0.1 A
0.1 A
V/f
V /f
V/f
1 mm
V/f
1 mm
V /f
V/f CLV CLV/PM
V/f CLV CLV/PM
V /f CLV CLV/PM
V/f CLV CLV/PM
V /f CLV CLV/PM
V/f CLV CLV/PM
10 V: 65536
360 YASKAWA ELECTRIC SIEP C710616 33D YASKAWA AC Drive L1000A Technical Manual