YASKAWA L1000A Series, Technical Manual, Page: 417 / 430

E.3 User Setting Table
No. Name
User
Setting
S3-14 Torque Compensation Fade Out Speed
S3-15 Torque Compensation Fade Out Time
S3-16 Torque Limit Reduction Time
S3-20 D w ell 2 Speed Reference
S3-21 D w ell 2 End Speed
S3-25 DC Injection Gain in Regenerative Operation
S3-26 DC Injection Gain in Motoring Operation
S3-27 Torque Compensation Value with Load Condition 1
S3-28 Torque Compensation Value with Load Condition 2
S3-29 A nalog Input from Load Cell with Load Condition 1
S3-30 A nalog Input from Load Cell with Load Condition 2
S3-34 Anti-Rollback Torque Bias 1
S3-35 Anti-Rollback Torque Bias 2
S3-37
Position Deviation Level to Apply Anti-Rollback Torque
B ias 1
S3-38
Position Deviation Level to Apply Anti-Rollback Torque
B ias 2
S3-39 Anti-Rollback Integral Gain
S3-40 Anti-Rollback M ovement Detection
S3-41 Position Lock Gain at Start Reduction
S4-01 Light Load Direction Search Selection
S4-02 Light Load Direction Search Method
S4-03 Light Load Direction Search Time
S4-04 Light Load Direction Search Speed Reference
S4-05 R escue Operation Torque Limit
S4-06 R escue Operation Power Supply Selection
S 4-07 UPS Power
S4-08 UPS Operation Speed Limit Selection
S4-12 DC Bus Voltage during R escue Operation
S4-13
R escue Operation Power Supply Deterioration Detection
Level
S4-15 Speed Reference Selection at R escue Operation
S5-01 Short Floor Operation Selection
S5-02 Nom inal Speed for Short Floor Calculation
S5-03 Short Floor Minimum Constant Speed Time
S 5-04 Distance Calculation Acceleration Time Gain
S5-05 Distance Calculation Deceleration Time Gain
S5-10 Stopping Method Selection
S5-11 Deceleration Distance
S5-12 Stop Distance
S5-13 Direct Landing M inimum Speed Level
S6-01
Motor Contactor R esponse Error (SE 1) Detection/Reset
Selection
S6-02 Starting Current Error (SE2) Detection D elay Time
S6-04 Output Current Error (SE3) Detection D elay Time
S6-05 Brake R esponse Error (SE4) Detection Time
S6-10 Overacceleration Detection Level
S6-11 Overacceleration Detection Time
S6-12 Overacceleration Detection Selection
S6-15 Speed Reference Loss Detection
S6-16 Restart after Baseblock Selection
T1-00 Motor 1/Motor 2 Selection
T1-01 Auto-Tuning M ode Selection
T1-02 Motor Rated Power
T1-03 Motor Rated Voltage
T1-04 Motor Rated Current
T1-05 Motor Base Frequency
T1-06 Number o f Motor Poles
T1-07 Motor Base Speed
T1-08 Encoder Resolution (pulses per revolution)
T1-09 Motor No-Load Current (Stationary Auto-Tuning 1 and 2)
T1-10 Motor Rated Slip (Stationary Auto-Tuning 2)
T2-01 Auto-Tuning M ode Selection
T2-04 Motor Rated Power
T2-05 Motor Rated Voltage
T2-06 Motor Rated Current
No. Name
User
Setting
T2-08 Number o f Motor Poles
T2-09 Motor Base Speed
T2-10 Single Phase Stator Resistance
T2-11 Motor d-Axis Inductance
T2-12 Motor q-Axis Inductance
T2-13 Induced Voltage Constant Unit Selection
T2-14 Motor Induced Voltage Constant
T2-16 Encoder Resolution
T2-17 Encoder Offset
YASKAWA ELECTRIC SIEP C710616 33D YASKAWA AC Drive L1000A Technical Manual
Q
u
ic
k
R
e
fe
re
n
c
e
S
h
e
e
t