4.6 Setup Procedure for Elevator Applications
Models CIM R-LD2A0085 to 2A0415, C IM R -LD 4A 0045 to 4A0216
1. Use a Phillips screwdriver (M4) to loosen the screw holding the CN19 connector cover in place.
Phillips screwdriver (M4)
F ig u r e 4 .2 8 R e m o v in g t h e C N 19 C o n n e c t o r C o v e r
2. Slide the CN19 connector cover from the drive as shown in
Figure 4.29.
О «.
О
°0
0 = 0
°o
F ig u r e 4 .2 9 S lid in g t h e C N 19 C o n n e c t o r C o v e r
3. Insert a straight-edge screwdriver into the opening as shown in
Figure 4.30,
then remove the CN19 connector
cover by sliding it as shown in
Figure 4.30.
F ig u r e 4 .3 0 R e m o v in g t h e C N 19 C o n n e c t o r C o v e r
122
YASKAWA ELECTRIC SIEP C710616 33D YASKAWA AC Drive L1000A Technical Manual