Mitsubishi Electric FR-F820-00046, Instruction Manual

Page: 406 / 940

(M) Monitor display and monitor output signal Parameters
5 - 234
71 171 RO1
Commercial power
supply side motor 1
connection
Output depending on the motor drive
conditions when the multi-pump
function is used.
Pr. 575 to
Pr. 591
5-392
72 172 RO2
Commercial power
supply side motor 2
connection RO2
73 173 RO3
Commercial power
supply side motor 3
connection RO3
74 174 RO4
Commercial power
supply side motor 4
connection
75 175 RIO1
Inverter side motor 1
connection RIO1
76 176 RIO2
Inverter side motor 2
connection RIO2
77 177 RIO3
Inverter side motor 3
connection RIO3
78 178 RIO4
Inverter side motor 4
connection RIO4
79 179 Y79
Pulse train output of
output power
Output in pulses every time the
accumulated output power of the
inverter reaches the Pr. 799 setting.
Pr. 799 5-253
80 180 SAFE
Safety monitor output
(SAFE) signal
The SAFE signal is output when the safety
stop function is activated and the
internal safety circuit status is normal.
— 2-65
82 182 Y82 BACnet binary output
Enables output from the Binary Output
object for BACnet communication.
Pr. 549 5-506
85 185 Y85 DC current feeding
Output when there is a power failure or
undervoltage for the AC current.
Pr. 30 5-552
86 186 Y86
Control circuit capacitor
life
(for Pr. 313 to Pr. 322)
!
Output when the control circuit capacitor
approaches the end of its life.
Pr. 255 to
Pr. 259
5-91
87 187 Y87
Main circuit capacitor life
(for Pr. 313 to Pr. 322)
!
Output when the main circuit capacitor
approaches the end of its life.
88 188 Y88
Cooling fan life
(for Pr. 313 to Pr. 322)
!
Output when the cooling fan approaches
the end of its life.
89 189 Y89
Inrush current limit circuit
life
(for Pr. 313 to Pr. 322)
!
Output when the inrush current limit
circuit approaches the end of its life.
90 190 Y90 Life alarm
Output when any of the control circuit
capacitor, main circuit capacitor and
inrush current limit circuit or the cooling
fan approaches the end of its life.
91 191 Y91
Fault output 3(power-OFF
signal) Output when an error occurs due to an
inverter circuit fault or connection fault.
⎯
5-240
92 192 Y92
Energy saving average
value updated timing
Switches between ON and OFF each time
the average power saving is updated
when using the power saving monitor.
This cannot be set in Pr. 195 or Pr. 196,Pr.
320 to Pr. 322 (relay output terminal).
Pr. 52, Pr. 54,
Pr. 158,
Pr. 891 to
Pr. 899
5-60
93 193 Y93
Current average monitor
signal
Outputs the average current and
maintenance timer value as a pulse.
This cannot be set in Pr. 195 or Pr. 196,
Pr. 320 to Pr. 322 (relay output terminal).
Pr. 555 to
Pr. 557
5-97
Setting
Signal
name
Function Operation
Related
parameter Refer to
page
Positive
logic
Negative
logic
Tab. 5-101: Output terminal function assignment (3)