Mitsubishi Electric FR-F820-00046, Instruction Manual

Page: 279 / 940

Parameters (F) Setting of acceleration/deceleration time and acceleration/deceleration pattern
FR-F800 5 - 107
5.5.2 Acceleration/deceleration pattern
The acceleration/deceleration pattern can be set according to the application.
In addition, the backlash measures that stop acceleration/deceleration by the frequency or time set
with parameters at acceleration/deceleration can be set.
Linear acceleration/deceleration (Pr. 29 = "0" initial value)
When the frequency is changed for acceleration, deceleration, etc. during inverter operation, the out-
put frequency is changed linearly (linear acceleration/deceleration) to reach the set frequency with-
out straining the motor and inverter. Linear acceleration/deceleration has a uniform frequency/time
slope.
Pr. Name Initial value Setting range Description
29
F100
Acceleration/deceleration pattern
selection
0
0 Linear acceleration/deceleration
1 S-pattern acceleration/deceleration A
2 S-pattern acceleration/deceleration B
3 Backlash measures
6
Variable-torque acceleration/
deceleration
140
F200
Backlash acceleration stopping
frequency
1 Hz 0 to 590 Hz
Set the stopping frequency and time
during backlash measures.
Valid by backlash measures
(Pr. 29 = "3").
141
F201
Backlash acceleration stopping time 0.5 s 0 to 360 s
142
F202
Backlash deceleration stopping
frequency
1 Hz 0 to 590 Hz
143
F203
Backlash deceleration stopping time 0.5 s 0 to 360 s
Fig. 5-20:
Characteristic for parameter 29 = 0
I002556E
[Linear acceleration/
deceleration]
Setting value "0"
Time
Output fr
equenc
y
(H
z)