Mitsubishi Electric FR-F820-00046, Instruction Manual

Page: 793 / 940

Parameters Ethernet communication (FR-F800-E)
FR-F800 5 - 621
– Reply code definition
The reply to the instruction execution is set to RWr2, 10, 12, 14, 16, 18.
When executing the frequency setting (RYD, RYE) or instruction code execution (RYF), check the
reply code (RWr2) in the remote register after execution.
Data Item Alarm definition Remarks
Reply code
H0000 Normal
No error (normal completion of
instruction code execution)
Reply code to RWr2
when Pr. 544 = 0
Reply code to RWw10,
12, 14, 16, and 18
when Pr. 544 = 18
H0001 Write mode error
Parameter write was attempted during
operation other than a stop in the
network operation mode.
H0002
Parameter selection
error
Unregistered code number was set.
H0003 Setting range error
Set data is outside the permissible
data range.
Reply code 1
H00 Normal
No error (normal completion of
instruction code execution)
Reply code to RWr2 when
Pr. 544 ≠ 0
H01 Write mode error
Parameter write was attempted during
operation other than a stop in the
network operation mode.
H03
Frequency command
setting range error
The value outside the range is set.
Reply code 2
H00 Normal
No error (normal completion of
instruction code execution)
H01 Write mode error
Parameter write was attempted during
operation other than a stop in the
network operation mode.
H02
Parameter selection
error
Unregistered code number was set.
H03 Setting range error
Set data is outside the permissible
data range.
Tab. 5-347: Reply codes