Mitsubishi Electric FR-F820-00046, Instruction Manual

Page: 684 / 940

(N) Operation via communication and its settings Parameters
5 - 512
●
Analog value
Object
identifier
Object name
Present value
access type
Description Unit
1
Output
frequency
R Represents the output frequency monitor. hertz (27)
2 Output current R Represents the output current monitor. amperes (3)
3 Output voltage R Represents the output voltage monitor. volts (5)
6 Running speed R Represents the running speed monitor.
revolution-per-
minute (104)
8
Converter
output voltage
R
Represents the converter output voltage
monitor.
volts (5)
14 Output power R Represents the output power monitor. kilowatts (48)
17 Load meter R Represents the load meter monitor. percent (98)
20
Cumulative
energization
time
R
Represents the cumulative energization time
monitor.
hours (71)
23
Actual operation
time
R Represents the actual operation time monitor. hours (71)
25
Cumulative
power
R Represents the cumulative power monitor.
kilowatt-
hours (19)
52 PID set point R Represents the PID set point monitor. no-units (95)
54 PID deviation R
Represents the PID deviation monitor. (Minus
display is available with reference to 0%, 0.1%
increment)
no-units (95)
67
PID measured
value 2
R Represents the PID measured value 2 monitor. no-units (95)
92
Second PID set
point
R Represents the second PID set point monitor. no-units (95)
94
Second PID
deviation
R
Represents the second PID deviation monitor.
(Minus display is available with reference to
0%, in 0.1% increment.)
no-units (95)
95
Second PID
measured value
2
R
Represents the second PID measured value 2
monitor.
no-units (95)
200 Alarm history 1 R
Represents the fault history 1 (the latest fault)
monitor.
no-units (95)
201 Alarm history 2 R
Represents the fault history 2 (second fault in
past) monitor.
no-units (95)
202 Alarm history 3 R
Represents the fault history 3 (third fault in
past) monitor.
no-units (95)
203 Alarm history 4 R
Represents the fault history 4 (fourth fault in
past) monitor.
no-units (95)
300
Speed scale
C
Controls the ratio to the frequency command.
(Setting range: 0.00 to 100.00)
(refer to page 5-509)
percent (98)
310
PID set point
CMD
C
Set the PID action set point.
This object is the PID set point during PID
operation if Pr. 128 = "60 or 61".
(Setting range: 0.00 to 100.0)
no-units (95)
311
PID measured
value CMD
C
Set the PID measured value.
This object is the PID measured value during
PID operation if Pr. 128 = "60 or 61".
(Setting range: 0.00 to 100.0)
no-units (95)
312
PID deviation
CMD
C
Set the PID deviation (0.01 increment). This
object is the deviation during PID operation if
Pr. 128 = "50 or 51".
(Setting range: -100.00 to 100.00)
percent (98)
320
Second PID set
point CMD
C
Set the second PID action set point.
This object is the set point during PID
operation if Pr. 753 = "60 or 61". (Setting range:
0.00 to 100.00)
no-units (95)
Tab. 5-267: Object assignment for analog values (1)