Mitsubishi Electric FR-F820-00046, Instruction Manual

Page: 210 / 940

Parameter List Parameters
5 - 38
The parameter number in parentheses is the one for use with the LCD operation panel and the parameter unit.
Setting can be made only for the standard model.
The setting is available only with the 400 V class.
The setting is available for the FR-F800-E only or when a compatible plug-in option is installed.
!
The setting is available only when a communication option is installed.
G130 660
Increased magnetic excitation
deceleration operation selection
5-564
G131 661 Magnetic excitation increase rate 5-564
G132 662
Increased magnetic excitation
current level
5-564
G200 800 Control method selection 5-41
G203 245 Rated slip 5-566
G204 246 Slip compensation time constant 5-566
G205 247
Constant-power range slip
compensation selection
5-566
G211 820 Speed control P gain 1 5-55
G212 821 Speed control integral time 1 5-55
G213 824
Torque control P gain 1 (current loop
proportional gain)
5-55
G214 825
Torque control integral time 1
(current loop integral time)
5-55
G216 827 Torque detection filter 1 5-59
G224 828 Parameter for manufacturer setting. Do not set.
G311 830 Speed control P gain 2 5-55
G312 831 Speed control integral time 2 5-55
G313 834 Torque control P gain 2 5-55
G314 835 Torque control integral time 2 5-55
G316 837 Torque detection filter 2 5-59
G410 653 Speed smoothing control 5-567
G411 654 Speed smoothing cutoff frequency 5-567
G932 89
Speed control gain (Advanced
magnetic flux vector)
5-45
G942 569 Second motor speed control gain 5-45
Pr.
group
Pr. Name
Refer to
page
Tab. 5-15: Control Parameter (2)