Mitsubishi Electric FR-F820-00046, Instruction Manual

Page: 407 / 940

Parameters (M) Monitor display and monitor output signal
FR-F800 5 - 235
94 194 ALM2 Fault output 2
Output when the inverter's protective
function is activated to stop the output
(at fault occurrence).
The signal output continues even during
an inverter reset, and the signal output
stops after the reset release.
⎯
5-239
95 195 Y95 Maintenance timer signal
Output when Pr. 503 reaches the Pr. 504
setting or higher.
Pr. 503, Pr. 504 5-95
96 196 REM Remote output
Output via terminals when certain
parameters are set. Pr. 495 to
Pr. 497
5-247
98 198 LF Alarm
Output when an alarm (fan fault or
communication error warning) occurs.
Pr. 121, Pr. 244
5-160,
5-459
99 199 ALM Fault
Output when the inverter's protective
function is activated to stop the output
(at fault occurrence). The signal output is
stopped after a reset.
⎯
5-239
200 300 FDN2 Second PID lower limit
Output when the value is lower than the
lower limit of second PID control.
Pr. 753 to
Pr. 758
5-353
201 301 FUP2 Second PID upper limit
Output when the value is higher than the
upper limit of second PID control.
202 302 RL2
Second PID forward/
reverse rotation output Output during forward rotation under
second PID control.
203 303 PID2
Second During PID
control activated
Output during second PID control.
204 304 SLEEP2
During second PID
output shutoff Output during second PID output
suspension function operation.
Pr. 753 to
Pr. 758, Pr. 1147
to Pr. 1149
205 305 Y205
Second PID deviation
limit
Output when the absolute deviation
value during second PID control exceeds
the limit value.
Pr. 753 to
Pr. 758,
Pr. 1145,
Pr. 1146
206 306 Y206
Cooling fan operation
command signal Output when the cooling fan operation is
commanded.
Pr. 244 5-160
207 307 Y207
Control circuit
temperature signal
Output when the temperature of the
control circuit board reaches the
detection level or higher.
Pr. 663
208 308 PS PU stopped signal Output while the PU is stopped. Pr. 75 5-63
211 311 LUP
Upper limit warning
detection Output when the load fault upper limit
warning is detected.
Pr. 1480 to
Pr. 1492
5-189
212 312 LDN
Lower limit warning
detection Output when the load fault lower limit
warning is detected.
213 313 Y213
During load
characteristics
measurement
Output during measurement of the load
characteristics.
215 315 Y215 During cleaning
Output during operation of the cleaning
function. Pr. 1469 to
Pr. 1479
5-348
Setting
Signal
name
Function Operation
Related
parameter Refer to
page
Positive
logic
Negative
logic
Tab. 5-101: Output terminal function assignment (4)