Mitsubishi Electric FR-F820-00046, Instruction Manual

Page: 393 / 940

Parameters (M) Monitor display and monitor output signal
FR-F800 5 - 221
Calibration procedure for terminal FM when using the operation panel (FR-DU08)
Operation
Screen at power-ON
The monitor display appears.
Changing the operation mode
Press to choose the PU operation mode. [PU] indicator is lit.
Calibration is also possible in the External operation mode.
Parameter setting mode
Press to choose the parameter setting mode. (The parameter number read previously appears.)
Calibration parameter selection
Turn until " " appears. Press to display " ".
!
Selecting the parameter number
Turn until " " (C0 (Pr. 900) FM/CA terminal calibration) appears. Press to enable the
parameter setting. The monitored value of the item (initially the output frequency) selected by Pr. 54 "FM/CA terminal
function selection" will appear.
Pulse output via terminal FM
If stopped, press or to start the inverter operation. (To monitor the output frequency, motor
connection is not required.
When a monitor that does not require inverter operation is set in Pr. 54, calibration is also possible during a stop status.
$
Scale adjustment
Turn to move the meter needle to a desired position.
%
Setting completed
Press to enter the setting. The monitored value and " " flicker alternately.
Turn to read another parameter.
Press to return to the " " display.
Press twice to show the next parameter.
Tab. 5-98: FM terminal calibration
NOTES Calibration can also be made for the External operation.Set the frequency in the External opera-
tion mode, and make calibration in the above procedure.
Calibration can be performed during operation.
For the operation from the parameter unit, refer to the Instruction Manual of the parameter unit.