manualshive.com logo in svg

Kyocera TASKalfa 550c, Manual

The Kyocera TASKalfa 550c combines efficiency and versatility, making it a reliable addition to any office. Enhance your productivity by easily accessing the Operator's Manual for free download on our website. Discover the full potential of this high-performance device in just a few clicks at manualshive.com.

Share
Download
background image

7 COMMAND CENTER ADMINISTRATOR MODE

194    Maintenance From COMMAND CENTER

Maintenance From COMMAND CENTER

This section details procedures for maintaining this equipment. It covers backing up and restoring files, deleting files 
stored on this equipment, and updating the software on COMMAND CENTER.

About the maintenance functions

In the [Maintenance] menu of the COMMAND CENTER administrator mode, an administrator can perform the following 
maintenance:

Uploading client software in COMMAND CENTER

An administrator can upload client software that allows users to download to their computers from COMMAND CENTER.  
This maintenance feature is used to upload new versions of software in COMMAND CENTER.

 P.195 “Uploading the software”

Removing client software from COMMAND CENTER

An administrator can remove client software that restricts users from downloading software from COMMAND CENTER.  
This maintenance feature is used to disable specific software in COMMAND CENTER.

 P.196 “Removing the client software”

Backing up data in the hard disk

An administrator can create backup files of address book, mailboxes, and templates in the hard disk.  This maintenance 
feature is used to create the backup files before updating the system software or hard disk replacement, etc.

 P.197 “Backing up data”

Restoring data from the backup files

An administrator can restore the address book, mailboxes, and templates data from the backup files.  This maintenance 
feature is used to restore the data after updating the system software or hard disk replacement, etc.

 P.200 “Restoring data from backup file”

Deleting files stored in the hard disk

An administrator can delete scanned data, transmission data, and reception data in the hard disk.  This maintenance 
feature must be operated periodically to maintain the hard disk space for future operation.

 P.202 “Deleting the data from local folder”

Registering directory service

An administrator can register the directory service properties of the LDAP (Lightweight Directory Access Protocol) server.

 P.203 “Managing directory service”

Setting up notifications

An administrator can enable the notifications by Emails and specify the events causing the notifications.

 P.205 “Setting up notification”

Importing or exporting address book data

This equipment allows you to import and export address book data in CSV format.

 P.209 “Importing and exporting the Address Book”

Importing or exporting department code

An administrator can import and export department code data in CSV format.

 P.214 “Importing and exporting the department code”

Exporting logs and journals

An administrator can export logs and journals as CSV files.  This feature is used to save the logs and journals as files 
before clearing them, if you want to maintain them.

 P.217 “Exporting the logs, journals, and counters”

Clearing logs and journals

An administrator can clear logs and journals in this equipment. This maintenance feature must be operated periodically to 
maintain the hard disk space for future operation.

 P.219 “Clearing the logs and journals”

Rebooting the equipment

An administrator can reboot the equipment.

 P.221 “Rebooting the equipment”

Summary of Contents for TASKalfa 550c













































































































































































































































































































































Reviews:

No comments

Related manuals for TASKalfa 550c

QMS 4060 Supplementary Manual preview
4060
Brand: QMS Pages: 27
QMS 4060 Accessories Manual preview
4060
Brand: QMS Pages: 3
IBM RS/6000 44P Series 270 User Manual preview
RS/6000 44P Series 270
Brand: IBM Pages: 216
Tally T6090 Maintenace Manual preview
T6090
Brand: Tally Pages: 202
Oki MC160MFP Network Manual preview
MC160MFP
Brand: Oki Pages: 32
Oki MB460 Setup Poster preview
MB460
Brand: Oki Pages: 2
Oki MB290 MFP Guia Do Usuário preview
MB290 MFP
Brand: Oki Pages: 96
Oki MB290 Quick Start Manual preview
MB290
Brand: Oki Pages: 2
Oki MB280 MFP User Manual preview
MB280 MFP
Brand: Oki Pages: 78
Oki MB280 Quick Start Manual preview
MB280
Brand: Oki Pages: 2
Oki MB260 MFP Wireless Usb Installation preview
MB260 MFP
Brand: Oki Pages: 2
Oki MB260 MFP Safety And Regulatory Information Manual preview
MB260 MFP
Brand: Oki Pages: 32
Oki MB260 MFP Guía Del Usuario preview
MB260 MFP
Brand: Oki Pages: 52
Oki MB260 MFP User Manual preview
MB260 MFP
Brand: Oki Pages: 49
Oki CX3641 MFP Guia De Instalação preview
CX3641 MFP
Brand: Oki Pages: 48
Oki C9850hdn Guía Del Usuario preview
C9850hdn
Brand: Oki Pages: 161
Oki C9800hdn Brochure preview
C9800hdn
Brand: Oki Pages: 6
Oki C711WT Manual De L'Utilisateur preview
C711WT
Brand: Oki Pages: 84

Brands by name

Popular brands

Load more brands