Kyocera TASKalfa 550c, Manual

Page: 110 / 332

7 COMMAND CENTER ADMINISTRATOR MODE
108 Setting up From COMMAND CENTER
3
In the Network submenu page, click link or scroll the page to find the setting table, and
click the button of the setting to set the network settings as required.
In the Network submenu page, you can set the following:

P.109 “Setting up TCP/IP”

P.111 “Setting up Filtering”

P.112 “Setting up IPv6”

P.113 “Setting up IPX/SPX”

P.114 “Setting up AppleTalk”

P.114 “Setting up Bonjour”

P.115 “Setting up LDAP Session”

P.116 “Setting up DNS Session”

P.117 “Setting up DDNS Session”

P.119 “Setting up SMB Session”

P.121 “Setting up NetWare Session”

P.122 “Setting up HTTP Network Service”

P.123 “Setting up SMTP Client”

P.125 “Setting up SMTP Server”

P.126 “Setting up POP3 Network Service”

P.127 “Setting up SNTP Service”

P.128 “Setting up FTP Client”

P.128 “Setting up FTP Server”

P.129 “Setting up SLP”

P.130 “Setting up SNMP Network Service”

P.135 “Setting up Security Service”

P.155 “Setting up Web Services Setting”

P.155 “Setting up LLTD Setting”
4 Click [Set] to save the settings and close the sub window.
5
Click [Save].
The confirmation dialog box appears.
If you want to restore the current settings without saving the changes, click [Cancel]. Clicking [Cancel] cannot
restore the defaults. This can only clear the changes and restore the current settings before saving the
changes.