Kyocera TASKalfa 550c, Manual

Page: 181 / 332

7.COMMAND CENTER ADMINISTRATOR MODE
Setting up From COMMAND CENTER 179
7 COMMAND CENTER ADMINISTRATOR MODE
2
Enter the following items as required.
Queue Name — Enter the queue name using up to 31 alphanumeric characters. The queue name is case
sensitive so that “Queue1” and “queue1” will be added as different queues.
Duplex Printing — Select whether a raw job will be printed on both sides of the paper.
Paper Size — Select the default paper size that applies to a raw job.
Paper Type — Select the default paper type that applies to a raw job.
Orientation — Select the default orientation that applies to a raw job.
Stapling — Select whether a raw job will be stapled.
Output Tray — Select the default output tray that applies to a raw job. A banner page that is created by NetWare,
UNIX, and Windows operating systems also will be outputted to the tray set here.
PCL Form Line — Enter the number of lines printed per page.
PCL Font Pitch — Enter the font pitch when the selected font number represents a fixed pitch scalable font. Pitch
is measured by characters per inch, so a 10-pitch is ten characters per inch.
PCL Font Point Size — Enter the font size when the selected font number represents a proportionally spaced
scalable font. The Font Size option allows you to determine the point size (height) of the default font.
PCL Font Number — Enter the font number of the internal PCL font to be used as the default font for printing. You
can check the font numbers and internal PCL fonts in the Internal PCL Font List. Refer to the Printing Guide for
the font number of internal PCL fonts.
PCL Line Termination — Select the type of the line termination.
Symbol set — Select the symbol set that applies to a raw job.
Paper Source — Select the paper source that applies to a raw job.
Do not Print Blank Pages — Select whether blank pages are printed or not.
When printing is performed using the UNIX filters or CUPS, this setting is not reflected.
If you do not want to print blank pages in these printings, enable [Do not Print Blank Pages] in the UNIX filter
command or CUPS setting.
For the setting instructions, refer to the
Software Installation Guide or Printing Guide .
Letterhead Print Mode — Select whether the last page (odd page number) is printed on the same side as the
other odd-number pages when printing both sides of a Raw print job whose total page number is odd. Select
[Enable] to print the last page on the same side (back) as the other odd-number pages. Select [Disable] to print it
on the same side (front) as even-number pages.
3 Click [Save].
The queue name is added to the list.