7.COMMAND CENTER ADMINISTRATOR MODE
Setting up From COMMAND CENTER 131
7 COMMAND CENTER ADMINISTRATOR MODE
5) Create SNMP User Information
SNMP user information registered into this equipment is displayed in a list. SNMP user information can be registered,
edited, deleted or exported. For the details, see the following:
P.132 “Registering or editing SNMP user information”
P.133 “Exporting SNMP user information”
P.134 “Deleting SNMP user information”
6) Enable SNMP V3 Trap
Select whether SNMP V3 Trap is sent or not.
7) SNMP V3 Trap User Name
Enter an SNMP V3 Trap User Name.
8) SNMP V3 Trap Authentication Protocol
Select an authentication protocol.
-
HMAC-MD5—Select this to use HMAC-MD5.
-
HMAC-SHA—Select this to use HMAC-SHA.
9) SNMP V3 Trap Authentication Password
Enter an authentication password.
10) SNMP V3 Trap Privacy Protocol
Select a protocol for data encryption.
-
None—Select this not to encrypt data.
-
CBC-DES—Select this to use CBC-DES.
11) SNMP V3 Trap Privacy Password
Enter a privacy password.
12) Enable Authentication Trap
Select whether to send SNMP Traps when this equipment is accessed using SNMP V1/V2 from a different read
community.
13) Enable Alerts Trap
Select whether to send SNMP V1/V2 Traps when an alert condition occurs.
14) IP Trap Address 1 to 10
Enter the IP address where the SNMP Traps will be sent. You can specify up to 10 addresses.
15) IP Trap Community
Enter the trap community name for the IP Traps.
16) IPX Trap Address
Enter the IPX address where the SNMP Traps will be sent.
When you want to use a user name registered in the SNMP V3 User Information list as an SNMP V3 Trap User Name,
you must enter the same protocols and passwords registered for the authentication protocol, authentication password
(not displayed on the list), privacy protocol and password (not displayed on the list) into the fields such as [SNMP V3
Trap Authentication Protocol], [SNMP V3 Trap Authentication Password], [SNMP V3 Trap Privacy Protocol] and
[SNMP V3 Trap Privacy Password]. If they do not match, information registered in the list will be adopted.
Summary of Contents for TASKalfa 550c
