Kyocera TASKalfa 550c, Manual

Page: 163 / 332

7.COMMAND CENTER ADMINISTRATOR MODE
Setting up From COMMAND CENTER 161
7 COMMAND CENTER ADMINISTRATOR MODE
8) Dial Type (Line 2)
Select the dial type for Line 2, if installed.
DP — Select this to use the Dial Pulse type for Line 2.
MF — Select this to use Multi-frequency type for Line 2.
Setting these items may not be required since they may not be displayed on the screen (it depends on your country
or region).
9) Line-2 Mode
Select how Line 2 is used, if installed.
- Tx/Rx — Select this to use Line 2 for sending and receiving a fax.
- Rx Only (24 Hour) — Select this to use Line 2 only for receiving a fax.
- Rx Only (Timer) — Select this to use Line 2 only for receiving a fax during specified time. When this is selected,
enter the start time and end time that Line 2 is used for only receiving a fax.
10) Resolution
Select the default resolution for sending faxes.
- Standard — Select this to set the Standard mode as the default resolution appropriate for the originals in which the
text is regular size.
- Fine — Select this to set the Fine mode as the default resolution appropriate for the originals in which the text is
small or a detailed drawing is contained.
- Ultra Fine — Select this to set the Ultra-Fine mode as the default resolution appropriate for the originals in which
the text is particularly small or a precision drawing is contained.
11) Original Mode
Select the default image quality mode for sending faxes.
- Text — Select this to set the Text mode as the default image quality mode appropriate for sending text originals.
- Text/Photo — Select this to set the Text/Photo mode as the default image quality mode appropriate for sending
originals containing both text and photos.
- Photo — Select this to set the Photo mode as the default image quality mode appropriate for sending photo
originals.
12) Exposure
Select the default exposure for sending faxes.
Select [Auto] to automatically apply the ideal contrast according to the original or select the contrast manually in 11
stages.
13) TTI
Select whether to print a transmission header (TTI) to identify the sender of received faxes.
14) RTI
Select whether to print a reception header (RTI) on received faxes to clearly identify the time, date, and page count of
received faxes.
15) ECM
Select whether to enable or disable the ECM (Error Correction Mode) to automatically re-send any portion of the
document affected by phone line noise or distortion.
16) Discard
Select whether to discard the lower portion of the received fax image if it is larger than the recording paper.
17) Reduction
Select whether to reduce the received fax image if it is larger than the effective printing area of the recording paper.
18) Duplex Print
Select whether to print the received fax images on both sides of the recording paper.
19) Rotate Sort
Select whether to rotate the output direction in the tray for each reception.
20) Recovery Transmit
Select whether to re-transmit a fax after failing the initially specified number of redial attempts. When this is enabled,
select the stored time length from 1 to 24 hours.
21) Journal Auto Print
Select whether to automatically print a transmission and reception journal after every transmission completed.