Kyocera TASKalfa 550c, Manual

Page: 10 / 332

1 OVERVIEW
8 COMMAND CENTER Overview
COMMAND CENTER Overview
COMMAND CENTER is a web-based job and device management tool that allows you to access information about this
equipment over the Internet.
COMMAND CENTER has two web sites available. One site is designed for end users and the other is for the
administrators.

The end-user site displays the equipment and job status and enables you to create and maintain private template
groups and private templates.

The administrator site enables network administrators to configure device settings, conduct maintenance, and update
the address book, public template group and public templates.
For instructions on how to use COMMAND CENTER in the administrator mode, see the following section.

P.95 “COMMAND CENTER ADMINISTRATOR MODE”
End users can:

Display general device information including the status, drawer/accessory configuration, and paper supply information.

Display and manage the status of print jobs, fax/internet fax transmission jobs, and scan jobs submitted by the user.
(Optional Fax Unit is required for displaying and managing the fax transmit jobs)

Display the job logs for print, fax/internet fax transmission, fax/internet fax reception, and scan. (Optional Fax Unit is
required for displaying the fax transmit and fax reception job log.)

Register and modify the templates.

Add or modify the contacts and groups in the address book.

Register and modify the mailboxes. (Optional Fax Unit is required.)

Display the counters logs

Download client software.

Because COMMAND CENTER uses cookies to store information on the user’s system, users must have cookies
enabled in the browser.

If COMMAND CENTER does not display the correct information in any pages, delete cookies and try again.