Kyocera TASKalfa 550c Manual Download Page 125

Page: 125 / 332

7.COMMAND CENTER ADMINISTRATOR MODE

Setting up From COMMAND CENTER 123

7 COMMAND CENTER ADMINISTRATOR MODE



Setting up SMTP Client

In SMTP Client, you can enable or disable SMTP transmission for sending the Internet Fax and Emails.

A From Address setting is also required to send Internet Fax and Emails. For information about the From Address
setting, see the following sections.



P.170 “Setting up Email settings”



P.173 “Setting up InternetFax settings”

The From Address can be also determined automatically when the User Management Setting is enabled. For more
information about the User Management Setting, see the following section.



P.254 “Setting up User Management”

1) Enable SMTP Client

When this is enabled, this equipment sends an Internet Fax and an Email to the specified SMTP server for
transmission over the Internet.

2) Enable SSL

Select whether the SSL (Secure Sockets Layer) is enabled or disabled for SMTP transmission.

Disable

— Select this to disable the SSL for SMTP transmission.

Verify with imported cert

— Select this to enable the SSL using the imported CA certificate.

Accept all certificates without CA

— Select this to enable the SSL without using imported CA certificate.



When [Verify with imported cert] is selected, you must import the CA certificate in this equipment.



P.135 “Setting up Security Service”



Not all operating systems support SSL for all protocols.

3) SSL/TLS

Select the protocol for the SSL when the [Enable SSL] option is enabled.

STARTTLS

— Select this to send a message in TLS (Transport Layer Security) using STARTTLS that is the

extension command for SMTP transmission.

Over SSL

— Select this to send a message in SLL (Secure Socket Layer).

When you select [Over SSL], make sure to change the port number correctly. Generally, “465” port is used for the
Over SSL instead of “25” port.

4) SMTP Server Address

Enter the IP address or FQDN (Fully Qualified Domain Name) of the SMTP server when [Enable SMTP Client] is
enabled.

If you use FQDN to specify the SMTP server, you must configure the DNS server and enable the DNS in the DNS
Session.

1
2
3
4
5
6
7
8
9

10
11

Summary of Contents for TASKalfa 550c












































































































































































































































































































































Search results

Summary of Contents for TASKalfa 550c

Reviews:

Related manuals for TASKalfa 550c

Brands by name

Popular brands

Kyocera TASKalfa 550c, Manual

Search results

Summary of Contents for TASKalfa 550c

Reviews:

Related manuals for TASKalfa 550c

Brands by name

Popular brands