Kyocera TASKalfa 550c, Manual

Page: 165 / 332

7.COMMAND CENTER ADMINISTRATOR MODE
Setting up From COMMAND CENTER 163
7 COMMAND CENTER ADMINISTRATOR MODE

Setting up Save as file settings
In the [Save as file] submenu in the [Setup] menu, an administrator can configure the Save as file settings that apply to the
Save as file operations. An administrator also configures the Save as file settings that apply to the Save as file operation
using the N/W-Fax driver.
Some settings may not be reflected on the touch panel immediately after saving them. The settings will be updated by
pressing the [FUNCTION CLEAR] button on the control panel or after an Auto Clear time period.
Setting the Save as file settings
1
Access COMMAND CENTER in the administrator mode.

P.100 “Accessing COMMAND CENTER Administrator Mode”
2
Click the [Setup] menu and [Save as file] submenu.
The Save as file submenu page is displayed.
3 In the Save as file submenu page, set the Save as file settings as required.
In the Save as file submenu page, you can set the following:

P.164 “Setting up Local Storage Path”

P.164 “Setting up Storage Maintenance”

P.165 “Setting up Destination”

P.165 “Setting up Folder Name”

P.166 “Setting up Format”

P.166 “Setting up Single Page Data Saving Directory”

P.167 “Setting up File Composition”

P.167 “Setting up User Name and Password at User Authentication for Save as File”

P.167 “Setting up Searching Interval”

P.168 “Setting up Remote 1 and Remote 2”

P.169 “Setting up N/W-Fax Destination”

P.169 “Setting up N/W-Fax Folder”