Kyocera TASKalfa 550c, Manual

Page: 157 / 332

7.COMMAND CENTER ADMINISTRATOR MODE
Setting up From COMMAND CENTER 155
7 COMMAND CENTER ADMINISTRATOR MODE

Setting up Web Services Setting
In Web Services Print and Web Services Scan, you can set the Web services Setting. The Web Services Print operations
and Web Services Scan operations are performed on client computers with Windows Vista through a network.
1) Friendly Name
Assign the friendly name for this equipment.
2) Web Services Print
Select whether the Web Services Print is enabled or disabled.
- Enable — Select this to enable the Web Services Print.
- Enable with web Security — Select this to enable the Web Services Print using SSL communication.
- Disable — Select this to disable the Web Services Print.
To enable Web Services Print using SSL, a certificate must be installed in this equipment or a client computer. For the
details, see the following pages:

P.135 “Setting up Security Service”

P.316 “Installing Certificates for a Client PC”
3) Printer Name
Assign the printer name for this equipment.
4) Printer Information
Assign the printer information for this equipment.
5) Web Services Scan
Select whether the Web Services Scan is enabled or disabled.
6) Scanner Name
Assign the scanner name for this equipment.
7) Scanner Information
Assign the scanner information for this equipment.

Setting up LLTD Setting
Enable this setting for confirming the device connection status, installing devices or accessing the COMMAND CENTER.
This setting also allows you to discover the desired device over the local network and view device information such as
location, IP address, MAC address or profile on the Network Map under the Windows Vista environment.
1) Enable LLTD
Select whether the LLTD setting is enabled or disabled.
- Enable : Enables the LLTD.
- Disable : Disables the LLTD.
1
2
3
4
5
6
7
1
2