Kyocera TASKalfa 550c, Manual

Page: 171 / 332

7.COMMAND CENTER ADMINISTRATOR MODE
Setting up From COMMAND CENTER 169
7 COMMAND CENTER ADMINISTRATOR MODE
If you want to allow users to specify either Remote 1 or Remote 2, select the one that is not set for the network folder
as a destination and select [Allow the following network folder to be used as a destination] of the selected folder.

Setting up N/W-Fax Destination
You can configure a network folder to store documents that are sent using the N/W-Fax driver with the Save as file option
enabled.
1) Do not allow any network folder to be used as a destination
Select this to not allow any network folders to be used as Save as file destinations for N/W-Faxes documents. When
selected, users can only save an N/W-Fax document with the Save as file option enabled to local storage.
2) Use Network Folder Destination
Select this to allow network folders to be used as Save as file destinations for N/W-Fax documents. When selected,
set the N/W-Fax Folder settings to specify which network folder to use.

Setting up N/W-Fax Folder
In the N/W-Fax Folder, you can specify in which network folder N/W-Fax documents are saved.
1) Protocol
Select the protocol for uploading an N/W-Fax document to a network folder.
- SMB — Select this to send an N/W-Fax document to the network folder using the SMB protocol.
- FTP — Select this to send a file to the FTP server.
- NetWare IPX/SPX — Select this to send a file to the NetWare file server using the IPX/SPX protocol.
- NetWare TCP/IP — Select this to send a file to the NetWare file server using the TCP/IP protocol.
2) Server Name
When you select [FTP] as the protocol, enter the FTP server name or IP address where an N/W-Fax document will be
sent. For example, to send an N/W-Fax document to the “ftp://192.168.1.1/user/scanned” FTP folder in the FTP server,
enter “192.168.1.1” in this box. You can specify the directory at the [Network Path] box.
When you select [NetWare IPX/SPX] as the protocol, enter the NetWare file server name or Tree/Context name (when
NDS is available).
When you select [NetWare TCP/IP] as the protocol, enter the IP address of the NetWare file server.
3) Port Number(Command)
Enter the port number to be used for controls, if you select [FTP] as the protocol. Generally “-” is entered for the control
port. When “-” is entered, the port number, that is set at [FTP Client] in the [Network] submenu of the [Setup] menu, will
be used. Change this option if you want to use another port number.
4) Network Path
Enter the network path to store an N/W-Fax document.
When you select [SMB] as the protocol, enter the network path to the network folder. For example, to specify the
“users\nw-fax” folder in the computer named “Client01”, enter “\\Client01\users\nw-fax\”.
When you select [FTP] as the protocol, enter the directory in the specified FTP server. For example, to specify the “ftp:/
/192.168.1.1/user/nw-fax” FTP folder in the FTP server, enter “user/nw-fax”.
When you select [NetWare IPX/SPX] or [NetWare TCP/IP] as the protocol, enter the folder path in the NetWare file
server. For example, to specify the “sys\scan” folder in the NetWare file server, enter “\sys\scan”.
5) Login User Name
Enter the login user name to access an SMB server, FTP server, or NetWare file server, if required. When you select
[FTP] as the protocol, anonymous login is assumed if you leave this box blank.
1
2
1
2
3
4
5
6
7