background image

 

 

®

 

 

 

CautionWe highly recommend that you have an authorized QMS service technician install your QMS 4060 as well 
as the optional large-capacity input feeder and the 3000-sheet large-capacity output stacker. However, if you do 
install these options yourself (or if you ever move the printer and these options), you must make certain that the 
option aligns correctly with the printer.

This document provides quick installation information for both the large-capacity input feeder and the 3000-sheet large-capacity output 
stacker.  For complete information, refer to chapter 6, “Hardware Options,” in the Options manual (on the 4060 Documentation  
CD-ROM).

Unpack all items 
from the box.

Save the packing 
material for 
possible 
repacking.

Locate the 
support stand, 
the support stand 
guide, and the 
sheet guide.

Open the front 
door of the 
printer.

Using a Phillips 
screwdriver, 
remove the right 
side paper input 
cover by 
loosening the 
front screw and 
removing the rear 
screw.

Attach the sheet 
guide to the 
printer using the 
screws you 
loosened and 
removed earlier.

Install the 
support stand 
guide using the 
screws attached.

Lift the support 
stand and place it 
on top of the 
support stand 
guide.

Attach the 
support stand to 
the support stand 
guide.

Pull out the 
support stand 
slide-rails until 
they lock in the 
out position.

Set the LCIF on 
the pins of the 
slide-rail.

Secure the LCIF 
to the support 
stand using the 
thumbscrews.

Slide the LCIF 
into the sheet 
guide on the 
printer until it 
locks in place.

Caution
Adjust the 
leveling feet 
on the 
support 
stand so that 
the leveling 
chains are 
just touching 
the floor.

Make sure the 
power on the 
printer is turned 
off.

Press the release 
handle on the top 
of the LCIF, and 
pull it away from 
the printer.

Connect the 
interface cable to 
the connector on 
the rear lower-left 
side of the 
printer.

Slide the LCIF 
into the sheet 
guide on the 
printer until it 
locks in place.

1

 

 

  

2

 

 

3

..

........

..

......

 

4

 

5

 

6

 

LTR

LTR

LTR

 

 

 

7

Note: Refer to Chapter 6, “Hardware Options,” of the
Options manual (on the 4060 Documentation
CD-ROM) for instructions on using the LCIF.

8

!

Reviews: