Connectivity
221
Connect to a Wi-Fi Network via WPS
If you’re using a Wi-Fi router with Wi-Fi Protected Setup (WPS), you can connect your phone easily.
1. With two fingers, swipe down from the status bar to open Quick Settings.
2. If Wi-Fi connection is off, tap the
WI-FI
tile to turn it on.
3. Tap
below the
WI-FI
tile and check the list of detected Wi-Fi.
4. Tap >
WPS Push
, and then press the WPS button on your Wi-Fi router.
Note
: To use the Wi-Fi Protected Setup (WPS) PIN method, tap >
WPS Pin Entry
.
Disconnect from a Wireless Network
Quickly disconnect from a wireless network your phone is connected to.
1. With two fingers, swipe down from the status bar to open Quick Settings.
2. If Wi-Fi connection is off, tap the
WI-FI
tile to turn it on.
3. Tap
below the
WI-FI
tile and check the list of detected Wi-Fi
4. You can:
l
Tap the wireless network that the phone is connected to, and then tap
DISCONNECT
.
l
If you want to remove the settings for this network, touch and hold the network name, and
then tap
Forget network
.
To connect to another wireless network, see
Prevent Notifications from Unsecured Wi-Fi Networks
.
Wi-Fi Direct
Use Wi-Fi Direct to connect directly to other Wi-Fi Direct devices simply via Wi-Fi, without an access
point or via the Internet.
1. With two fingers, swipe down from the status bar to open Quick Settings.
2. If Wi-Fi connection is off, tap the
WI-FI
tile to turn it on.
3. Tap
below the
WI-FI
tile and check the list of detected Wi-Fi networks.
4. Tap >
Wi-Fi Direct
.
5. The Wi-Fi Direct settings menu appears.
l
Wi-Fi Direct and Wi-Fi are unavailable at the same time.
6. Tap a device with which to connect. If connected via Wi-Fi, you will see a confirmation. Follow
the onscreen instructions.
7. Accept the connection on the other device.