GRAUPNER mz-24 PRO, Programming Manual

Page: 54 / 240

With a control assigned in the "C8" line of the sub-
menu "
CTL Set
", for example the proportional dial
DVx, this value can also be proportionally varied.
Touch the
WIZ. button in the "Gyr/Gover" display
to leave the assistant and open the next sub-menu
...
THR.HOLD
During competition, is expected that gas engines
should be completely turned off. In the training phase,
this is a bit inconvenient since you would have to re-
start the engine after each autorotation training land-
ing.
Therefore make the appropriate settings during the
training phase, as fully described in the
THR.HOLD
paragraph, in this display so that the gas engine can
be kept idling during the autorotation phase without
the clutch engaging, or so that any electric drive is
definitely off, for example:
Tip
With the " "Throttle Cut"* " option in the Base menu,
there is an alternative emergency off function.
Touch the WIZ. button in the "THR.HOLD" display
to leave the assistant and open the next menu, for
example ...
…, which you can leave to go to the base menu by
touching the
ENT button at the right bottom:
IMP.M (import from SD card)
Once a memory card is in an operational transmitter,
a blue memory card icon appears at the top right of
the basic display:
In the "Model Sel" sub-menu described here...
... you can import compatible models into the trans-
mitter memory from the memory card inserted in the
transmitter's card slot.
For this reason, from the list of empty model memo-
ries offered in the "Model Sel" display, first select one
that appears appropriate, such as model memory 4
which is still available in this example. Touch the field
on the right adjacent to the yellow 04 with a finger
or the provided stylus. The color of the field switches
from black to blue:
54 Base menu - Model selection