GRAUPNER mz-24 PRO, Programming Manual

Page: 176 / 240

Throttle mixer
Phase-dependent settings of throttle tracking with roll, elevation and tail
In the basic transmitter display, use your finger or the
provided stylus to touch the gear icon labeled "F":
Touch
The display switches to the blue function menu. Touch
the menu item "
THR.MIX ":
Touch
The throttle needs to follow an increase in pitch;
likewise, the throttle should track with large cyclical
control movements, that is, tilting a swashplate in a
desired direction. The motor output should also be
adapted when the thrust of the tail rotor is increased
so as to maintain a constant system speed. In the
mz-
24 HoTT transmitter programs, throttle tracking with
roll, pitch and tail control can be attempted separately.
This is advantageous especially with aerobatics (for
example when performing rolls) since cyclical control
deflections are used with middle collective pitch val-
ues where the carburetor is about halfway open that
require significantly higher motor output.
If you are using a governor to automatically maintain
the rotor speed, the governor adapts the output as
necessary. Otherwise, you can adjust throttle tracking
in these three mixers.
Phase-dependent settings
The here mentioned sub-menu offers the possibility
of phase specific settings. Recognizable on the top
left side of the display in green color is displayed the
phase name. As standard is displayed the name of the
phase 1, which is indicated by the name "NORMAL"
or "PHASE 1". As soon as you will have defined one
or many other phases in the "
PHASE " menu, you will
be able to switch among those phases. Activate the
corresponding switch or switches if desired to switch
between the phases.
• ACT column
(active)
In in the value fields of this column, indicate wheth-
er the function of the line is generally blocked
(
BLK ) or ON .
Once you set this value field to ON , you can turn
the effect of the respective control element on the
selected mixer for specific quick links individual-
ly on and off with a control assigned in the option
field "Ctrl/sw" (see below in the section).
• SET column (setting)
By touching one of the three buttons in this col-
umn changes to the setting page of the selected
mixer, e.g.:
Touch
Based on the defaults shown here, you can adapt
the current settings as needed by touching the val-
ue field to be changed to activate it, for example:
Touch
The color of the value field switches from black to
blue:
176 Function menu | Helicopter model - Throttle mixer