GRAUPNER mz-24 PRO, Programming Manual

Page: 122 / 240

Touch
... until the desired phase appears, for example:
Touch NO to terminate the procedure. Touch YES
to confirm the procedure: The source phase is
copied to the selected target phase.
You can change the existing phase name as de-
scribed in detail in the section "
Model name " and/
or adapt the transferred delay or transferred switch
to your needs.
• DEL button (delete)
A blue, set-up phase that is therefore active can be
deleted or deactivated by touching the
DEL [ de-
lete ] button at the right of the display with your fin-
ger or the provided stylus, for example:
Touch
• "SLOW" column
(delay)
To avoid abrupt changing of the control surfac-
es positions while switching between phases, it
is advisable to program in this column a time for
smooth transition to the respective phase. It is
therefore also possible to set a different time for
switching from a phase to (for example) phase 3
then for switching to phase 1.
To change a switchover time, activate the value
field "SLOW" for the desired phase by touching it,
for example:
Touch
The color of the field switches from black to blue:
Set the desired value with the + or – button at
the right edge. In the blue and hence active value
field, you can select switchover times from 0 to 9.9
seconds, for example:
Use the same procedure with the other phase.
122 Function menu | general - Phase