GRAUPNER mz-24 PRO, Programming Manual

Page: 42 / 240

To transfer the model name into the model memory,
touch the red button
=
[
ENTER
] at the bottom right:
Touch
Touch the MAN. button at the top left to go to the
next option:
Touch
In the following sub-menus, the options to configure
the required options will be proposed according to the
model type previously selected.
The sequence of the buttons for the manual program-
ming referred to a fixed wing model will be explained
in the following sections.
Tip
Assistant-controlled model programming will be sub-
sequently addressed with reference to programming a
helicopter.
Manually programming the basic settings of a
new model
Tap then on the MAN. button:
Touch
The manual, so as the assistant controlled , program-
ming of a model follows always a program predefined
procedure which begins with the input of the model
name:
"Model name"
Switch between uppercase and lowercase and vice
versa with the
CAPS button at the bottom edge of the
screen, and similarly, press the NUM button to go to
the numbers 0 … 9 and special characters.
Switch to the desired symbols chart and tap on the
first character of the model name.
To enter an empty space tap on the
[ Space ] but-
ton. You can select other special characters by touch-
ing the
SPECIAL button.
All other characters can be entered in the same man-
ner. A maximum of 15 characters can be entered for
a model name.
By touching
< [ DELETE ] in the bottom row of red
buttons, the last character is deleted. To delete all of
the entered characters at once, touch
<< [ CLEAR ].
The characters which are entered in this manner
appear in the blue field above the keypad in the se-
quence in which they are entered, for example:
42 Base menu - Model selection