GRAUPNER mz-24 PRO, Programming Manual

Page: 41 / 240

Touch
… and then touch NO to terminate the process or
YES
to switch the model …
Touch
… "Please wait!!" appears for about 1 second:
• If a receiver is already bound to the selected model
memory, in case of inactive Thr.POS warning the
RF module of the transmitter will be switched on
and the display changes to the base display with a
warning window:
… or by touching the related BACK button until
you will be brought directly to the base display of
the transmitter.
NEU (create new model)
Tips
• To reach up for model memories with number
higher than 06, tap on the NEXT button on the
right upper side of the display (next page).
• You can change between already occupied model
memories through SEL .
As described above under SEL , to set up a new
model, select a free model memory or model mem-
ory that has already been assigned but is no longer
required. Tap on the
NEW button on the right side of
the display:
Touch
After tapping on NEW a selection window will appear
in which you can select one option between manual
or assisted programming of the new model so as
NO
to interrupt the procedure:
So as it happens when you switch the transmitter
on, you now have the option of waiting a few sec-
onds until the display disappears automatically or
maintaining the RF transmissions by manually tap-
ping the
ON
button, or switching them off by tap-
ping the OFF button.
• If no receiver is bound to the selected model mem-
ory, the display also changes to the base display
with the visible window. The RF module remains
then switched off and in place of the "RF ON/OFF"
warning it will appear "No receiver bound to TX!":
Tapping on the SET button directly opens the
sub-menu » TX ctl « of the basis menu, where you
can bind your receiver in the line "Bind ON/OFF"
…
41 Base menu - Model selection