GRAUPNER mz-24 PRO, Programming Manual

Page: 39 / 240

Touch
Tip
In the same way you can proceed for the display of the
model type in the "Import from SD card" option.
HoTT synchronization methods setting
As already mentioned in the paragraph " Starting up the
receiver ", if both receiver and RF module are switched
off each preferred of the total 30 model memories of
the mz-24 HoTT Pro transmitter can be switched from
the standard memory specific HoTT-Synchronization
to transmitter specific and vice-versa. It is possible to
recognize the model memory with active HoTT-syn-
chronization method from the yellow "G" which is dis-
played on the right near the selection button which is
near the model name.
WITHOUT " G " on the right
near the button = memory
specific bound
WITH "
G
" on the right near
the button = transmitter spe-
cific (global) bound
In the following representation the model memories
1, 2 and 3 are left as example on memory specific
HoTT-Synchronization and the memories 4, 5 and 6
have been switched to transmitter specific HoTT-Syn-
chronisation.
Switching the HoTT-Synchronization
Switch the RF module of your transmitter off.
Tap on the actually in use model memory, for example
model memory 3:
Touch
The color of the field switches from black to blue:
Now tap on the model type icon, ...
Touch
... here it will appear a selection window, where the se-
lection buttons are always indicated with the descrip-
tion of the method,
through which you can switch . In
this example from memory specific to transmitter spe-
cific. Subsequently the button is actually described
with the synonym "GLOBAL" for transmitter specific:
Touch NO to terminate the procedure. Touch-
ing GLOBAL switches the selected model memory
to "global", that means transmitter specific HoTT-Syn-
chronization:
39 Base menu - Model selection