GRAUPNER mz-24 PRO, Programming Manual

Page: 34 / 240

Program description
As already mentioned in section Operating the dis-
plays , you can touch one of the four gear icons at the
bottom right of the basic display identified with "B",
"F", "S" and T…
… to open the respective selection menu.
These sub menus contain all of the setting and display
menus required to program a model as well as the
transmitter.
The description of the individual menu items starting
on page
38 is offered in the sequence provided by
the transmitter.
Notice
The display screen-shots of this manual are in-
tended for illustration purpose only. Therefore
please note that the represented settings and
setting values cannot be used for 1:1 reference.
"B“ ("green“ basis menu )
Touch the gear icon labeled " S " with a finger or with
the provided stylus:
This menu contains all of the base setting and display
menus that are needed to set up the model:
Name Menu Page
MOD.SEL. "Model Sel" 38
Model Type "Model type" 60
E.P.A "Servo path/servo limit" 62
REV/SUB
"Servo reverse/servo sub-
trim"
64
THT.CUT "Throttle Cut"* 66
TX ctl "Transmitter controls" 68
Timer "Timer" 74
Fail Safe "Fail Safe" 80
Trim Step "Trim step" 82
Servo "Servo monitor" 86
CTL Set "Control setting" 90
Out.Swap "Transmitter output" 96
Telemetry "Telemetry setting" 98
Announce "Announce" 118
"F" ("blue" function menu )
Touch the gear icon labeled "
F
" with a finger or with
the provided stylus:
Depending on the model type of the currently active
model memory, different menu structures are dis-
played. These can also vary depending on the basic
settings of the model. The following menu represen-
tations therefore only offer a selection as an example:
Name Menu Page
Phase "Phase setting" 120
D/R,EXP "Dual rate, Expo" 124
THR.CRV "Throttle curve" 128
Prog.MIX "Free mixers" 134
Trainer "Trainer system" 141
Logical sw "Logical switch" 148
Sequence "Sequencer" 150
For reasons of space the description of these "general
menus" in the next paragraphs will not be repeated be-
cause the sub-menus are contained also in the "blue"
menus of the model type "helicopter" and "airplane".
However, for major clarity, these "general menus" have
been integrated both in the
Index and in the following
charts according to the sequence.
* hidden for models without a motor
34 Program description