GRAUPNER mz-24 PRO, Programming Manual

Page: 38 / 240

Model selection
Edit model memories 1 … 30
Switch your receiver system and the RF module of
your transmitter
off . Then touch the " M x " value field
line in the left side of the display with a finger or the
provided stylus in the basic transmitter display of the
transmitter:
Touch
... to change directly to the " Model select " sub-menu:
Or alternately touch the gear icon labeled "B" to open
the same sub-menu from the base menu:
Touch
• Until the transmitter is in Wireless trainer
mode , the access to the "
Model select
" sub-
menu is generally blocked.
Model type display
The name of the actually active model memory is
shown in the upper part of the display and the mod-
el type of the active model memory is indicated by
the icon right underneath. For example the model
type"Heli" of the active model memory 01 which is
named "STARLET":
Without starting a model change, that actual model
type can also be recalled by simply tapping on the
desired model memory, for example:
Touch
Notices
• If there is no reaction by tapping on the value
field M x in the base menu of the transmitter
or if after tapping on the "green" " Model se-
lect " icon, visible in the base menu, it appears
the warning message ...
• ... then there is still a connection between
transmitter and receiver. Switch the power
supply of the receiver off and try again:
38 Base menu - Model selection