GRAUPNER mz-24 PRO, Programming Manual

Page: 74 / 240

The basic transmitter display comes with four timers
(see the display below). Next to the transmitter oper-
ating time and the model time on the left side of the
display, there is an "upper" and "lower" timer on the
right side of the display.
Short tapping on the "upper" timer 1 and/or the
"lower" timer 2 resets the related timer. Longer tap-
ping opens the setting page of the tapped timer and
tapping on the model timer on the left of the display
opens the date and time setting page.
Alternately, you can also access the "Timer" menu
item also from the green "
BASE menu ": Touch the
gear icon labeled "B" in the basic display of the trans-
mitter...
Touch
Touch
Touch
The display switches to the green base menu. Touch
the menu item "
TIMER ".
Touch
Timers
Setting TIMER 1 and TIMER 2 as well as the date and time
Tip
Touch the NEXT button at the top right edge of the dis-
play to switch the rotation procedure from " TIMER1" to
" TIMER2", and from "DATE" back to " TIMER1":
TIMER1 and TIMER2
To program the "timer 1" or "timer 2", it is preferable
to start in the "MODE" line by checking the value field
directly to the right. By default,
UP is provided as a
synonym for counting forward (see the figure above).
If this is what you want and you do not need an alarm
for a forward-counting timer, then jump to the alarm
function description section and start reading at
"START SW" on the next page.
Alarm function
An alarm function can be activated for a forward-count-
ing and backward-counting timer by setting the de-
sired time frame in the minute and/or second field to
the right next to "ALARM". Within the last 20 seconds
of this period, beeps sound so that you do not have
to continuously monitor that display during the flight.
Acoustic signal sequence
20 s before zero: 2 beeps
Single beep every 2 seconds
10 s before zero: single beep
Single beep every second with a
changed pitch
5 s before zero: single beep every second with re-
duced frequency
Zero: voice trigger
To specify the desired time period, touch the left min-
ute field...
Touch
… and/or the right second field:
Touch
The color of the field switches from black to blue:
74 Base menu - Timers