GRAUPNER mz-24 PRO, Programming Manual

Page: 81 / 240

Move the control element for this control channel into
the desired position and touch the
SET
button at the
bottom right of the display to transfer the position into
the value field, for example:
Touch
Use same procedure to save additional fail safe po-
sitions.
Finally, in the bottom line "Delay", repeatedly touch
the value field to choose the desired delay from
among the four delays (0.25 s, 0.5 s, 0.75 s and 1 s),
for example:
Notice
After having set the fail-safe positions so as the
proper delays, the settings saved on the trans-
mitter must be transmitted to the receiver. Other-
wise the settings could not be used in case of fail safe.
Switch at least now the receiver on and transmit the
selected
F/S values to the receiver by tapping on the
STO button, so that the setting can be recall in case
they will be needed.
Touch
The successful storage of the data is shortly con-
firmed in the display an at the same time the
F/S value
fields will be unmarked again.
Otherwise check the correct radio transmission be-
tween your transmitter and receiver systems and re-
peat the process.
Tip
By tapping on the needed F/S button in the "MODE"
column the stored fail safe position can be recalled and
changed as described. Unchanged
F/S values will be
unmarked as soon as the sub-menu has been left.
WARNING
• The fail safe settings stored in the
transmitter will not be automatically
transmitted to the receiver during the
operation! Their transmission must
be manually performed within a radio
connection by tapping on the STO but-
ton!
• The fail safe settings stored in the
transmitter should be restored after
changing a receiver and should be de-
leted in the previous receiver by Re-
set .
• Use this safety option to program a
Fail Safe for at least the motor throt-
tle position in gas models while idling,
or to program the motor function to
stop with electric models, or to hold
with helicopter models. This makes it
more difficult for the model to operate
independently after switching on the
receiver system or in case of malfunc-
tions and cause property damage and
injury. If necessary, ask for assistance
from an experienced pilot.
Touch the BACK button at the top left of the display
to leave this sub-menu and return to the basic menu.
81 Base menu - Fail safe