GRAUPNER mz-24 PRO, Programming Manual

Page: 126 / 240

Touch
The button color of both value fields changes from
black to blue:
Set the desired value with the + or – button at the
right edge.
The adjustment range is ±125%.
Setting asymmetrical Dual Rate values
Leave or set the value button right near "SYM" in the
lowest line on AUS .
Touch the left value field in the "D/R" line to set a dual
rate value to the minus side of the control travel, and/
or on the right to set a dual rate value on the plus side
of the control travel, for example:
The dual rate curve is simultaneously displayed in the
graph.
Touch the
RES button to reset a changed value in the
blue (and hence active) field to the default value.
Attention
For safety reasons, the dual rate value should
not fall below 20%.
Exponential function
Switch, as previously described in the Dual-Rate func-
tion, in the symmetrical setting of the Expo values the
value field in the "
SYM " line to ON and, once back to
the setting symmetrical Expo values, tap on the "EXP"
line in one of both value fields.
To set asymmetrical values set or leave the value field
in the "
SYM " line to OFF and tap on the left value field
to set an Expo value to minus and/or on the right side
to set an Expo value on the positive side of the control
travels, for example:
Touch
The color of the field switches from black to blue:
Set the desired value with the + or – button at the
right edge.
The adjustment range is ±100%.
Use the same procedure for a value on the plus side
of the control travel, for example:
The exponential curve is simultaneously displayed in
the graph.
Notice
The curve shown here is only for demonstration
purposes and does not represent an actual ex-
ponential curve.
126 Function menu | general - DR/Expo