GRAUPNER mz-24 PRO, Programming Manual

Page: 175 / 240

Use the same procedure for the value on the oppo-
site side of the control travel, for example:
Touch the RES button to reset a changed value in
a blue (active) value field to the default value.
You can make any necessary settings in the two
bottom EXP value fields as in the related descrip-
tion in the section "
"Dual rate, Expo" ".
After making your settings, leave this display and
go to "Heli-Mix" selection by touching the
BACK
button at the top left of the display.
Touch
Notice
The mixed values portrayed here are for
demonstration purposes only and do not rep-
resent real values.
Select another mixer here if desired and adjust it
as described.
• "CTL" column
(Control/switch)
In this column, as described in the section Control
and switch assignment , assign a control to the re-
spective mixer that you can use to turn the mixer
on and off, for example:
After making your settings, leave this menu and go to
"Menu selection" by touching the
BACK button at the
top left of the display.
175 Function menu | Helicopter model - Helicopter mixer