GRAUPNER mz-24 PRO, Programming Manual

Page: 35 / 240

Name Menu Page
Phase "Phase setting" 120
D/R,EXP "Dual rate, Expo" 124
PIT.CRV "Pitch curve" 154
THR.CRV "Throttle curve" 160
Gyr/Gover "Gyro/governor" 166
THR.HOLD "Throttle autorotation" 170
Swash "Swashplate mixer" 172
S.Limit "Swashplate limiter" 173
S.MIX "Heli mixer" 174
THR.MIX "Throttle mixer" 176
Prog.MIX "Free mixers" 134
Trainer "Trainer system" 141
PIT>>TAIL "Pitch >> tail mixer" 178
Logical sw "Logical switch" 148
Sequence "Sequencer" 150
Name Menu Page
Phase "Phase setting" 120
D/R,EXP "Dual rate, Expo" 124
THR.CRV "Throttle curve" 128
Idle LOW "Idle setting"* 180
Prog.MIX "Free mixers" 134
Snap roll "Snap roll setting" 181
Aile diff "Aileron setting" 182
Wing MIX "Wing mixer" 188
Flap MIX "AILE and FLAP mix"** 192
Flap set "Flap setting"** 196
Airbrake "Airbrake settings"** 200
Trainer "Trainer system" 141
Logical sw "Logical switch" 148
Sequence "Sequencer" 150
V-Tail "V-Tail"** 206
* hidden for models with an electric motor
** Depending on the selected model type or hidden.
Name Menu Page
Phase "Phase setting" 120
D/R,EXP "Dual rate, Expo" 124
THR.CRV "Throttle curve"* 128
Prog.MIX "Free mixers" 134
Snap roll "Snap roll setting" 181
Aile diff "Aileron setting" 184
Wing MIX "Wing mixer" 188
Flap MIX "AILE and FLAP mix"** 192
Flap set "Flap setting"** 196
Butterfly "Butterfly"** 202
Trainer "Trainer system" 141
Logical sw "Logical switch" 148
Sequence "Sequencer" 150
V-Tail "V-Tail"** 206
* hidden for models without a motor
** Depending on the selected model type or hidden.
35 Program description