GRAUPNER mz-24 PRO, Programming Manual

Page: 189 / 240

Set the desired value with the + or – button at the
right edge.
Use the same procedure for a value on the plus side
of the control travel, for example:
Touch the RES button to reset a changed value in the
blue (and hence active) field to the default value.
Tip
To graphically display the current servo positions, you
can access them from nearly every menu with the but-
ton labeled
SERVO in the top right of the display or
alternatively pushing with inactivated value field at the
same time the

keys on the left of the display. Touch
the BACK button or push the ESC key to return to
your starting point.
Touch the BACK button at the top left of the display
or push the ESC key on the left of the display …
Touch
... to return to the mixer selection.
AILE >> RUDD line
(aileron >> rudder)
The rudder also moves to an adjustable degree when
the aileron is actuated. This can compensate for the
negative torque in conjunction with
Aileron differenti-
ation which smooths flight in curves. Of course, the
rudder remain separately controllable.
The setting range of ±150 % makes it possible to
appropriately adapt the direction of deflection. This
mixer can optionally be turned on and off by one of
the controls which cannot be independently reset, or
a control switch or even a logical switch, so that the
model can be controlled exclusively using the aile-
rons.
Tip
Normally, this mixer is adjusted so that the rudder ex-
tends on the side of aileron moving upward; an adjust-
ment of 50% is generally appropriate.
The adjustment should normally be only be symmet-
rical with the neutral point of the aileron control stick.
To set the mixer, use a finger or the provided stylus to
touch the middle button in the line "AILE >> RUDD":
Touch
The corresponding setting menu opens:
To enable this, touch the desired value field, such as
the left one:
Touch
The color of the field switches from black to blue:
189 Function menu | Airplane models - Airplane mixer