GRAUPNER mz-24 PRO, Programming Manual

Page: 181 / 240

Snap roll
Automated programming
In the basic transmitter display, use your finger or the
provided stylus to touch the gear icon labeled "F":
Touch
The display switches to the blue function menu. Touch
the menu item "
Snap roll ".
Touch
Some pilots like to automatically program snap rolls
when flying.
Phase-dependent settings
The here mentioned sub-menu offers the possibility
of phase specific settings. Recognizable on the top
left side of the display in green color is displayed the
phase name. As standard is displayed the name of the
phase 1, which is indicated by the name "NORMAL"
or "PHASE 1". As soon as you will have defined one
or many other phases in the "
PHASE " menu, you will
be able to switch among those phases. Activate the
corresponding switch or switches if desired to switch
between the phases.
The automated programming described here for
the
mz-24 HoTT Pro transmitter enables up to four
pre-programmed snap settings (positive right/neg-
ative right and positive left/negative left) per Phase.
The position of the switch assigned to the individual
presets determines the respective figure program in
which the control stick signals are set at a fixed value
independent of the momentary control stick positions.
That is, all aileron, elevator and rudder servos move
as if the relevant control stick had been shifted to the
preset position.
As usual, you can activate settings within a range of
±150% in the blue value field activated by a finger or
the provided stylus with the three buttons at the right
edge of the display, for example:
In general, the individual figure programs are activat-
ed and deactivated by switching the corresponding
value field in the "ACT" column from
BLK
to
ON
or
vice versa, by touching them, for example:
Finally, you should assign each activated figure pro-
gram, as described in the section
Control and switch
assignment , a control with which you can turn the fig-
ure programs on and off during flight.
WARNING
Never turn on one of these figure pro-
grams accidentally, especially during
flight! If the programs are turned on at in
the wrong location or time, it can cause significant
property damage and/or injury.
After you have finished making your settings, touch
the
BACK button at the top left of the display to return
to the menu selection.
181 Function menu | Airplane models - Snap Roll