EXFO FTB-1, User Manual

Page: 397 / 675

Test Results
NetBlazer
385
Service Configuration - Ramp
Service Configuration - Ramp
From the
Test
menu, tap
Results
,
Service Configuration
, and the
Ramp
tab.
Service Name and Selection
Service Name indicates the name of the selected service. Select the
service to be displayed by either using the left/right arrow or by tapping
over the service numbers area then tapping on a specific service number.
An orange background indicates the selected service while a green
background indicates the services that are enabled.
Committed/Excess Steps

Committed Steps indicate the pre CIR and CIR steps specified in the
ramp configuration.

Excess Steps indicate the CIR+EIR and Traffic Policing steps
specified in the ramp configuration.

Direction , available with Dual Test Set , indicates results from local to
remote (
L->R
) and remote to local (
R->L
).

TX Rate indicates the transmission rate for each step.

SLA Verified
indicates the committed SLA parameters that are used to
declare the pass/fail verdict. See Summary (EtherSAM) on page 405 for
more information on
Frame Loss
,
Max Jitter
,
Round-Trip Latency
,
and Max RX Rate .

Informational
parameters are for information purpose only, they are
not included in the test pass/fail verdict. See Summary (EtherSAM) on
page 405 for more information on
Frame Loss
,
Max Jitter
, and
Round-Trip Latency .

Average RX Rate
indicates the measured average utilization
throughput for each step.