EXFO FTB-1, User Manual

Page: 484 / 675

Test Functions
472
FTB-700G/800 Series
Filters
Assign to Capture
Note: Only available when the ETH-CAPTURE software option is enabled. Refer
to
Software Option
on page 34 for more information.
Assigns the selected filter for packet capture. See Packet Capture on
page 475.
Filter Configuration
Note:
Multiple filter criteria is only available when the ADV-FILTERS option is
enabled; otherwise only one criterion is possible. Refer to
Software Option
on page 34 for more information.
The filter configuration section allows to configure the filter criteria for the
selected filter. The configuration is only possible when the
Enable
check
box is cleared.

“
(
“ and “
)
“, the open and close parenthesis controls the
precedence of operands when more than two operands are used.
Only one level of parenthesis is supported. When no parenthesis
are used, a logical AND has precedence over a logical OR.

Not
check box when selected, adds the logical negation (not
equal) operator for the operand filter defined at its right.